Protocol
Prepare the changeover before the scarce resource stops
The expensive pause should not begin with looking for the checklist.
Before you use it
- Use when
- A meeting, deployment or equipment transition spends its limited window gathering basics.
- Avoid when
- This is an adaptation of setup-reduction thinking, not machinery instruction or permission to bypass change approval.
An idea to explore.
Try this idea.
Inspect the example, try the idea in your situation, then check your next move.
Why it matters
Separate preparation from the steps that truly require an interruption. Move only safe, authorized preparation earlier, so the reserved window is ready for the actual transition.
Steps
- List the changeover steps. Mark which truly require the resource to be stopped or reserved and which can safely be prepared while it remains available.
- Prepare and check the eligible inputs first; reserve the interruption for the remaining transition steps, under the normal approval and restart rules.
An example
A deployment window should not be the first time someone checks access, approved files and the rollback instructions. Preparing them does not mean making unauthorized production changes early.
Check your result
Did the change shorten the necessary interruption without moving unsafe work outside control?
Keep this limit in mind
- This is an adaptation of setup-reduction thinking, not machinery instruction or permission to bypass change approval.
My learning
Read. Recall. Repeat.
Save this idea and return to it on any device.
More from this collection
Help work finish instead of merely keeping it busy
Could a steadier release reduce artificial workload spikes?Which unfinished item is getting older without moving?Evidence and sources (1)
SMED distinguishes setup that requires stopping the process from preparation that can be completed outside that stop.
Claim basis: professional_convention. Claim limit: Only safe, authorized preparation is moved; the card is not machinery-operation instruction. Source access: selected_html_passages; accessed on: 2026-09-17; inspected sections: ["Internal and external setup operations"]. Source note: The knowledge-work example does not promise a sub-ten-minute transition or authorize work on running machinery. Agent scope review, 2026-10-11: LEI SMED distinguishes internal and external setup. The deployment example is an adaptation; ordinary approval, safe preparation and restart controls remain required.
Single Minute Exchange of Die · Internal and external setup operations
All sources (1)
Edition and review
Version 0.1.0 · Published
Agent review: Agent editorial and scoped evidence review · 2026-10-11